The JBL Bar 500MK2 sits in the middle of JBL’s refreshed 2025 Bar lineup. It combines a 5.1-channel soundbar, a 10-inch wireless subwoofer and a long list of connections in a package aimed at buyers who want a real step up from TV speakers without paying for a flagship system.
This profile rests on published sources, not on our own use of the soundbar. JBL’s own product page was not available to us, so it relies on two pages: a T3 article about JBL’s MK2 launch and the SoundGuys spec listing. We say which source each claim comes from. To see where the 500MK2 ranks among other models, read our best soundbars of 2026 comparison.
The Short Version
The Bar 500MK2 is a bar and sub package with a strong spec sheet for its tier: 750W, a 10-inch wireless sub, HDMI eARC, one HDMI input, Wi-Fi and Bluetooth. It fits a medium living room and a TV in the 50 to 65 inch range, and it is a good match for movie viewers who want serious bass.
Its limits are clear. It cannot add rear speakers, our sources do not list dedicated height drivers, and some features were reported as coming later by update. If you want a fully expandable setup, look at our Sonos Beam (Gen 2) profile, or at the larger JBL models that include rears.
Key Specs According to Our Sources
- Channels: 5.1, with Dolby Atmos support, per SoundGuys and T3.
- Power: 750W total, per SoundGuys and T3.
- Subwoofer: 10-inch, included, listed by SoundGuys as wireless.
- Bar size: About 37 inches wide, 2 inches high and 4.1 inches deep, and about 6.4 lbs, per SoundGuys’ metric figures converted to US units.
- Connections: HDMI eARC, one HDMI input, optical, Wi-Fi and Bluetooth 5.3, per SoundGuys.
- Streaming: Per T3, every model in the MK2 range supports AirPlay 2, Google Cast, Spotify Connect, Tidal Connect and Roon Ready, and the Bar 500MK2 supports Amazon Music HD.
- Room calibration: Listed by SoundGuys. A companion app is available for iOS and Android.
- Placement: Bookshelf/tabletop and wall-mount, per SoundGuys.
What Makes It Different
Power and a Real Subwoofer
On specs, the 500MK2’s biggest selling point is its bass hardware. T3 reports a 750W, 5.1-channel soundbar with a 10-inch subwoofer, and says the range goes from the 450W Bar 300MK2 up to the flagship 1300MK2 with 2,470W. The 500MK2 is therefore in the middle of the family, with enough power for most medium rooms. Wattage ratings are manufacturer figures and do not tell you how loud or clean a system sounds, so use them as a rough guide only.
Connections
For a mid-range bar, the connection list is generous. SoundGuys shows eARC, one HDMI input, optical, Wi-Fi and Bluetooth 5.3. The single HDMI input lets you plug in one device, such as a streaming box, and pass it through to the TV. Having eARC means lossless and Atmos-capable audio from the TV can reach the bar.
Streaming Ecosystem
T3 says the whole MK2 range supports AirPlay 2, Google Cast, Spotify Connect and Tidal Connect, and is Roon Ready. That is an unusually broad list for a bar at this level. Whichever phone you use, you can send music to the bar without the TV on. T3 also says all models but the entry-level 300MK2 support Amazon Music HD.
Atmos and DTS:X
SoundGuys lists Dolby Atmos support, and T3 describes the whole MK2 range as Dolby Atmos models. A 5.1-channel layout, though, means five main speakers plus a sub, and neither source lists dedicated up-firing height drivers for this model. That suggests Atmos height effects are created through processing rather than overhead speakers. Treat that as our reading of the spec listing, not a claim from JBL. On DTS:X, T3 reported that most models would get it by a software update later in 2025, and only the 1300MK2 and 1000MK2 had it at launch. Check JBL’s current support page before relying on DTS:X.
Setup and Connections
You connect the bar to your TV’s HDMI eARC or ARC port. The subwoofer is wireless, so it only needs a power outlet. Place it near the TV for a simple setup, and move it a little if bass sounds boomy or thin. SoundGuys lists room calibration and an iOS and Android app, which helps with initial tuning.
At about 37 inches wide and 2 inches high, the bar fits under most TVs and on most shelves. SoundGuys lists both tabletop and wall-mount placement, so check the box contents or accessories if you plan to mount it. Because JBL’s page was not available to us, we cannot confirm whether a wall bracket is included.
Pros and Cons
Pros
- 10-inch wireless subwoofer included
- 750W total power
- HDMI eARC, an HDMI input and optical
- Wi-Fi, Bluetooth 5.3, AirPlay 2, Google Cast, Spotify Connect, Tidal Connect and Roon Ready
- Compact enough for most TV stands
Cons
- No rear-speaker expansion
- Sources do not list up-firing height drivers
- DTS:X was reported as arriving by software update
- One HDMI input only
- We could not consult JBL’s official page, so some details are unconfirmed
Who Should Buy It
The Bar 500MK2 suits buyers who want a stronger sound than a basic bar without a complicated system. It is a good fit for a medium living room with a mid-size TV, and for anyone who cares more about bass and dialogue than about overhead effects. People who stream music from many services will appreciate the long list of supported apps and protocols.
It is less suited to those who want true surround from rear speakers, or buyers who prefer a single-brand ecosystem like Sonos. For a bigger package with rears included, our Samsung HW-Q990F profile covers a premium 11.1.4 system, and the Sonos Beam (Gen 2) profile covers a compact smart bar with its own upgrade path.
What to Check Before You Buy
- TV ports: Make sure your TV has an HDMI eARC or ARC port.
- Rear channels: If you want rear speakers, pick a larger JBL model or another brand.
- DTS:X: If DTS:X matters, confirm current support with JBL.
- Mounting: If you plan to mount the bar, confirm what hardware is included.
- Bass: Plan outlet access for the subwoofer near your TV.
You can see the current price and variants here: JBL Bar 500MK2 on Amazon. Buying through our link may earn a commission at no cost to you.
Sources